Tuesday, 23 July 2019

KNOW WHY SATELLITES ARE WRAPPED IN GOLD COLOURED FOIL !!


You’ve probably noticed that many artificial satellites are covered with what seems to be gold or silver foil. In fact, it’s not just satellites; you can see this in most space-related equipment (i.e., the equipment that actually goes into space).

While they may seem like they are draped in precious metal, it’s usually not gold at all… or even foil! It is actually a material called multi-layer insulation, or MLI.


MLI consists of lightweight reflective films assembled into thin layers that range in thickness. These layers are usually made of polyimide or polyester films (types of plastics) coated with very thin layers of aluminum. This is used over critical spacecraft parts to severely limit effect of surface temperature fluctuations in parts sensitive to thermal changes by limiting the amount of heat transferred between the two sides of the layers.



Depending on its orbit, a satellite can experience temperatures from below -200°F to well above 300°F, sometimes at the same time! Not to mention the high temperatures the onboard instruments can produce.MLI is designed to reflect solar radiation back into space, keeping the instruments cool enough to operate while in sunlight. It also maintains internal temperatures by keeping heat in, protecting the instruments from the extreme cold experienced when the spacecraft moves through Earth’s (or its own) shadow.


MLI can also provide a layer of defense against dust impacts, protecting delicate internal instruments and sensors from tiny particles of space debris.

5 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Because to reflect the radiation of the sun

    ReplyDelete
  3. Yellow safety tape. Means caution possible hazard. Signs or tags shall be posted to warn of potential hazard and employees shall be instructed of the possible hazard and what precaution should be taken.

    ReplyDelete
  4. Would these films also act as electromagnetic shielding for the instrumentation?

    ReplyDelete